A fabric you draw is a fabric you can deploy
Design is where the work starts. You describe the network the way you'd sketch it on a whiteboard, and get back a complete, consistent configuration for every device in it.
Live
Four steps, one source of truth
Choose the fabric and place the devices
Pick one of five fabric types, then add devices with a platform and a role. The role list is filtered by fabric and platform, so a Nexus is never offered as a P router and a router is never offered as an access switch.
Cable it
Draw the core links and the host links. Speed, module and port become the interface name each platform uses, and every link gets a description naming the device and port at the other end.
Add services
A wizard for VLANs, VRFs, E-Line and E-LAN. A service stays a draft until its required fields are filled, and is marked ready once they are. A CSV import handles long lists.
Generate, review, export
Every device's configuration, rendered from the same templates every time, with warnings for anything that doesn't add up. Export the topology to a printable PDF, or the whole project as a file.
Five fabrics, with the roles and services each one supports
Every fabric has an Access role for switches that hang off it rather than routing on it.
| Fabric | Underlay and overlay | Roles | Services |
|---|---|---|---|
| VXLAN | IGP underlay, BGP EVPN overlay, anycast gateways, optional TRM multicast | Spine, Leaf | VLAN, VRF |
| MPLS-LDP | OSPF or IS-IS with LDP, MP-BGP for L3VPN, optional MVPN | P, PE | VRF, E-Line, E-LAN |
| SR-MPLS | OSPF or IS-IS with segment routing and prefix SIDs, MP-BGP for L3VPN, optional MVPN | P, PE | VRF, E-Line, E-LAN |
| VRF-LITE | Routed core, per-VRF interconnects and loopbacks, OSPFv3 for IPv6 | Core | VLAN, VRF |
| PURE-L2 | Switching only: trunks, spanning tree, port-channels | Core | VLAN |
Three operating systems, written the way each one expects
IOS-XE
Catalyst 9000 switches as leaf, spine, PE, core or access. Catalyst 8000 and Catalyst 8000V routers as P, PE, core and, on VXLAN, spine.
NX-OS
Nexus 9000 as leaf, spine, core or access, with vPC for dual-homing and anycast gateways on VXLAN.
IOS-XR
ASR 9000 and NCS routers as P or PE on MPLS and SR-MPLS, with L2VPN through
l2transport and bridge domains.
Lab images are supported too: an IOU Layer 2 switch for access and core roles. A placeholder firewall can go on the canvas so the drawing matches the real network. It gets no configuration of its own, but it takes up the ports it's cabled to.
What a generated configuration contains
Base and management
Hostname, AAA, logging, NTP and ACLs for your monitoring networks. Management in its own VRF, and an out-of-band port on its own pool and gateway.
Underlay
Router IDs, /31 point-to-point links, IGP authentication, optional BFD per link, and LDP or segment routing where the fabric uses it.
Overlay
BGP EVPN or VPNv4/VPNv6 sessions with templates, route distinguishers and route targets allocated per VRF, and route reflection on spines and P routers.
Tenants
VRFs, VLANs, gateways (anycast or HSRP with the peer you choose), and optional IPv6 for each VLAN.
Layer 2 services
E-Line over EVPN or LDP pseudowires, E-LAN over VPLS, and on Catalyst PEs, VLANs stretched by VFI.
Multicast
TRM on VXLAN, and MVPN profiles on MPLS, including mLDP on an SR-MPLS core.
Saved to your account, never locked in
- Projects are saved to your account and open from any browser.
- A second tab can't silently overwrite the first. It's told the project changed.
- Export the whole project as a file and import it again later.
- Export the topology and an inventory to a printable PDF.
- Delete your account from inside the app, and everything goes with it.
The options that would break
- ESI dual-homing on Nexus. It's vPC there. Why
- E-Line and E-LAN on a Catalyst PE, and VLAN stretching over SR-MPLS.
- VXLAN roles on IOU images, which accept the config but don't forward it reliably.
- Access roles on routers, which would get switched config they reject.
Free while we launch
All five fabric types, every service, up to three projects. Sign in with Google or GitHub.