Plug the switch in. It configures itself.

Provision is the step after Design: one server that answers Nexus POAP and Catalyst PnP, and gives each box the configuration generated for it, plus the software image picked for its model, if you've picked one.

Later

One server, both provisioning protocols

  • Nexus boots, finds the server through DHCP option 150 and runs its POAP script.
  • Catalyst finds it through DHCP option 43 and talks PnP to it.
  • Each device is matched by serial number and gets its own configuration file.
  • An image is pushed only if one has been chosen for that device type.
  • One page shows what has checked in, what it was given, and what's still waiting.
provision
                 DHCP
  option 150 + poap.py  │  option 43
             ▼          │        ▼
  ┌────────────────────────────────────┐
  │  Fabricwright Provision            │
  │                                    │
  │  :80  POAP file downloads          │
  │       PnP HELLO / WORK-REQUEST     │
  │  :5000 management page             │
  └────────────────────────────────────┘
             │
        images/  configs/  inventory

Yours to run, on your own network

Provision won't be hosted. It's a server you download and run next to the devices, loaded with your own Cisco images. A provisioning server belongs on the management network, not across the internet from it.

Downloaded, not hosted

A virtual machine you run yourself. Nothing about your devices leaves your network.

Your images

You load your own licensed software images. Fabricwright never distributes Cisco's.

Build included

Build is Cisco's official IOS-XR golden ISO builder with a UI added on top. It comes with Provision, so a finished image can go straight to your devices.

Provision is planned for a later release, as part of a paid plan.